Painting, tiling or bricklaying? Choosing a construction trade
Compare three Certificate III construction trades at Novus College: painting and decorating, wall and floor tiling, and bricklaying and blocklaying.
If you want to build things with your hands, Novus College teaches three Certificate III construction trades: the CPC30620 Certificate III in Painting and Decorating, the CPC31320 Certificate III in Wall and Floor Tiling and the CPC33020 Certificate III in Bricklaying and Blocklaying. All three are nationally recognised and registered on CRICOS for international students. They share a common base in safety and site skills, but the day-to-day work is quite different. This guide sets out those differences so you can choose the trade that fits you.
The three trades at a glance
| Painting and decorating | Wall and floor tiling | Bricklaying and blocklaying | |
|---|---|---|---|
| Code | CPC30620 | CPC31320 | CPC33020 |
| What you work with | Paints, coatings, wallpaper, spray equipment | Tiles, adhesives, screeds, waterproofing membranes | Bricks, blocks, mortar, concrete |
| Typical tasks | Preparing surfaces, applying finishes, matching colours | Levelling floors, waterproofing wet areas, laying tiles | Setting out, building walls and corners, paving |
| Physical demands | Moderate: ladders, scaffolds, overhead work | Moderate to high: kneeling, lifting tile boxes | High: lifting, bending, outdoor work |
| Length and campuses | See the course page | See the course page | See the course page |
Course lengths, campuses and intake dates change, so each course page shows them from our live course data rather than this guide.
Painting and decorating (CPC30620)
Painting and decorating is about the finished look of a building and the protection of its surfaces. A large part of the job is preparation. You learn to clean, sand, fill and prime surfaces so the final coat lasts. You then apply paint by brush, roller and spray, and learn to match and mix colours to a specification.
The course also covers hanging wallpaper, applying decorative finishes and applying protective coatings to timber, metal and masonry. Because older buildings can contain lead paint and asbestos, you learn how to identify these hazards and work safely around them. You also learn to work at heights, including the safe use of elevating work platforms (EWPs) where the course includes them.
Painting suits people who are patient, notice small details and take pride in a clean finish. The work is mostly indoors, though exterior jobs are common too.
Wall and floor tiling (CPC31320)
Tiling turns a bare floor or wall into a finished, waterproof surface. Before a tile goes down, the surface has to be flat and sound, so you learn to prepare and level substrates using screeds and levelling compounds. In bathrooms, laundries and kitchens you apply waterproofing, which is one of the most important parts of the job because a failed membrane can damage a building.
You then lay tiles on walls and floors, including mosaic and decorative tiles, and learn to cut and fit tiles around corners, pipes and curved surfaces. The course also covers repairing and replacing damaged tiling.
Tiling suits people who enjoy precise, measured work and solving layout puzzles, such as how to centre a pattern in an uneven room. It involves a lot of kneeling and some lifting.
Bricklaying and blocklaying (CPC33020)
Bricklaying is structural work. You learn to read plans and set out a job, then build masonry walls, corners and openings to line and level. The course covers cavity walls and brick veneer, the two common ways masonry is used in Australian houses, as well as arches and curved walls.
You also learn about structural masonry, such as reinforced blockwork, and related tasks including basic concreting and laying segmental paving. Bricklayers often work outdoors as part of a crew, and the work is physically demanding.
Bricklaying suits people who like seeing a structure rise, enjoy working outside and are comfortable with heavy, repetitive physical work.
What all three share
Whichever trade you choose, the course includes common construction units. These cover:
- Work health and safety (WHS) on a construction site, including hazard identification and safe work practices
- Reading plans and specifications so you understand what you are building
- Measurements and calculations for materials and setting out
- Working safely with scaffolding and at heights
- Business basics, such as investigating business opportunities and planning finances for a new venture, for people who may want to work for themselves later
To work on a construction site in Australia you also need a general construction induction card, often called a White Card. Ask our team how this fits with your course.
Which suits you: 5 questions
- Do you prefer fine detail or physical strength? Painting and tiling reward detail. Bricklaying rewards strength and stamina as well as accuracy.
- Indoors or outdoors? Painting and tiling are mostly indoor work. Bricklaying is mostly outdoors, in all seasons.
- Finish work or structure? Painters and tilers finish a building. Bricklayers help build its structure.
- Working alone or in a crew? Painters and tilers often work alone or in small teams. Bricklayers usually work in crews alongside labourers.
- What are your business goals? All three trades can lead to running your own business one day. Think about which kind of job you would enjoy quoting for and doing every day.
If you are still unsure, compare all of our trade courses on the building and construction courses page.
After a trade: the Diploma of Building and Construction
Some tradespeople move into supervision, estimating or building management. The CPC50220 Diploma of Building and Construction (Building) covers planning building projects, building codes and standards, contracts, estimating and site management. It is a separate course with its own entry requirements, listed on its course page.
Licences in NSW
A qualification is not a licence. In New South Wales, some building work needs a licence or certificate from NSW Fair Trading, and the rules depend on the type and value of the work. Other states have their own regulators. Before you plan your career, check the current requirements on the NSW Fair Trading website or the regulator in the state where you want to work.
Ready to start your journey?
Enquire now · View courses · View intake dates
Questions about offers or scholarships? Contact our team.
Frequently asked questions
Which construction trade is easiest to learn?
Each trade has its own challenges. Choose based on the work you enjoy: finishing surfaces, precise tiling, or building structures.
Are these trade qualifications?
Yes. All three are national Certificate III trade qualifications.
Where are the trade courses taught?
At our Sydney campus in Ultimo. Course pages show current campuses.
Do I need a licence to work in these trades?
Licensing depends on the state and the type and value of work. In NSW, check NSW Fair Trading.